Oxidized bitumen 105/35

Oxidized bitumen 105/35 is suitable grade of oxidised asphalt to use as bonding compounds as hot melt adhesive at an application rate of approximately 1 Kg/m3 to bond the preformed sheets together and to structure which is made by blowing bitumen 60/70 by very hot air.

Uses bitumen 105/35

Oxidised bitumen 105 35 is using as raw material for bitumen coat, roofing, insulation and isolation bitumen membrane sheet.

Surface preparation to use oxidised asphalt 105/35

Before using oxidised asphalt 105/35 surfaces must be dry, clean and free of loose particles, formwork, curing products, irregularities, slurry, etc.

Application of blown bitumen 105/35

The blown bitumen 105/35 should be heated double temperature against the softening point to be able to have flow and viscosity.

Storage/handling of oxiasfalt 105/35

Oxiasphalt 105/35 has 10 years validity with multi time heating and colding, please refer to MSDS.

Packing of bitume oxyde 105/35

Bitume oxyde 105/35 is available in 25kg meltable and craft bag, drum and bulk.

Analyze of bitum oxide 105/35

TEST SPECIFICATION

STANDARD RANGE

TEST METHOD

Specific gravity @25/25 C

1.05 approx.

D-70

Penetration @25C

30/40

D-5

Softening point C

100/110

D-36

Ductility@25C

1.5min

D-113

Loss on heating (wt)%

0.2max

D-6

Flash point C

260min

D-92

Solubility in CS2 (wt)%

99min

D-4

Specific gravity @25/25 C

1.05 approx.

D-70




Facebook Twitter Google LinkedIn Email
natural bitumen